Publicidad
Idiomas disponibles
Idiomas disponibles
ACTIVE REAR
5
11
9
12
MBS 6215 Series (Active/Passive)
MBS 6215 A USB
2
3
1
6
7
10
8
4
13
1. USB Port
2. LCD Display
3. SD Card Port
4. MP3 Volume. This is used to adjust the signal
level of the USB/SD Card inputs.
5. MIC Volume control. It is used to adjust the signal
level from the Microphone input.
6. LINE Volume control. It is used to adjust the signal
level from the LINE input.
7. High control. It provides a boost or cut of up to
15 dB for the high frequency.
8. Low control. It provides a boost or cut of up to
15 dB for the low frequency.
9. MIC Input. XLR 3 pin connector for a balanced
microphone input.
10. LINE Input. 2x RCA connectors that allow to connect
an external unbalanced audio device (CD, tuner, deck).
11. LINE Input. Jack 3,5 connector that allows to
connect an external audio device (CD, tuner, deck).
12. MIX Out. XLR 3 pin connector in order to send the
pre-amplified signal to another amplifier device.
13. On/Off Power switch. Press it to power on/off the
device
14. AC power. Connect the incorporated AC power cord.
14
- 3 -
EN
User Manual / Manual de uso
Publicidad
