Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (Undermount Sink)
4. Screw bolts (HH) into the threaded holes of
stone top (B).
Hardware Used
Bolt
HH
5. Lower the sink brackets (II) over the bolts
(HH) and allow to rest on the sink lip. Adjust
location of bracket to firmly grasp sink lip.
Lower lock washers (KK) over bolts (HH) and
secure with nuts (JJ). Hand tighten nuts (JJ)
with included wrench (LL).
DO NOT OVER TIGHTEN!
Repeat for the remaining sink.
Tip: Check that the sink placement is well
centered front to back and side to side of the
stone top cut out before allowing the silicone
caulk to dry. If the sink is not centered well
unscrew sink clamps, re-adjust the sink position
and re-tighten the sink brackets.
Hardware Used
Sink bracket
II
Nut
JJ
Lock Washer
KK
Wrench
LL
4
HH
x 8
5
II
x 8
x 8
x 8
x 1
18
D
B
D
LL
2
1
D
B
D
3
JJ
KK
HH
Publicidad
