Descargar Imprimir esta página

EDM Product 07689 Manual De Instrucciones página 7

Quita pelusas
Ocultar thumbs Ver también para 07689:

Publicidad

Idiomas disponibles

Idiomas disponibles

▶ Never place the appliance on or near
sources of heat, such as a gas / electric
stove or inside a hot oven.
▶ The use of accessories or parts not
recommended by the manufacturer may
cause fire, electric shock or serious
injury.
▶ This appliance is made to be used
indoors. Never use it outdoors.
BASIC INSTRUCTIONS OF THE DEVICE
▶Use only the batteries indicated on the box or in this manual for the
product.
▶Always remove the batteries to disassemble or clean it.
▶The appliance may only be handled and used on a firm and stable
surface.
▶Never place the appliance on or near sources of heat.
▶The use of accessories or parts not recommended by the
manufacturer may cause fire, electric shock or serious injury.
▶This appliance is made to be used indoors. Never use it outdoors or
outside parts of the house.
▶This appliance has been designed and manufactured to be used for a
single purpose, to remove lint from the clothing that generates it.
PARTS OF THE
1
2
3
Instruction manual
1. Protective grid
2. Blades
3. Transparent tank
4. On-off switch.
5. 2xAA batteries (not included)
HOW TO USE
▶Lay the fabric on a smooth and firm surface, for example, on a
▶Turn the switch to the ON position and begin removing lint from the
▶Lint and fibers will collect in the transparent container from where
CLEANING AND CARE
▶Before proceeding to clean it, place the switch in the OFF position
▶To clean the transparent container, disassemble it and empty the lint
▶Clean the grid with the help of a brush. To clean the inside of the
▶Remember, you should never clean the device with the batteries
4
5
table or a semi-padded surface such as an ironing board. Open the
battery compartment cover and insert them following the polarity
instructions, once inserted correctly, close the cover.
fabric by gently passing over it.
they can be easily evacuated.
and remove the batteries from their compartment.
and fibers inside using the brush.
grid and the blade area, proceed as follows: release the grid support
by unscrewing it and you will be able to access the blade part, with
great care, you can clean them using the same brush.
installed as you could inadvertently turn it on.
ref. 07689
ES
PT
EN
FR

Publicidad

loading