Coccolle Nessia Manual Del Usuario página 16

4b. Adjust the height of the canopy and head rest.
4c-4d. Press the button at the back side of the back rest to adjust the height of
the canopy and head rest, the height can be adjusted in 3 different positions.
5. The assembly of the canopy and the bumper bar
5a-5b. Insert the canopy's plastic sides into the seat as pictured in 5a. 5c.
Assemble the bumper bar by inserting it on both sides of the seat as picture 5c.
Note: please make sure to lock the bumper in locked in place, you need to hear
the "click" sound.
6. Assembly of the seat
Pull up the lever on the top of the seat back to open or fold the seat.
6a. Fold/ unfold and put it in the desired position by putting it down in direction
the arrow indicates. Please make sure to lock the seat in place the secure lock
is when you hear the "click" sound.
6b. Press the unlock button on both sides of the seat and, at the same time pull
up the seat to take off the frame.
6c. Pull out the button and lift up the seat as the arrow indicates in picture 6c,
then assemble the seat in opposite direction as in picture 6c, insert it into the to
finish assembly.
7. Opening and folding the canopy
7a. Extend or fold the canopy as shown in pictures 7a-7b
8. Rotating the bumper and using the telescopic handle
8a. Unlock and pull out one side of the bumper to rotate the bumper in 360
degrees
8b. In order to adjust the height of the handle press the button as the arrow
shows in picture 8b.
9. Adjustment of the footrest
9a. Press the button as the arrow in the picture 9a shows to adjust the footrest
in 3 positions
9b. The Footrest's length is adjustable: adjust the foot rest by pushing the
button under the foot rest as pic 9b, press the button down at the same time
pull the foot rest, then the foot rest become longer. To shorten the length, press
the button down at the same time push the foot rest and the foot rest becomes
shorter. The length of the footrest cannot be shortened if first it hasn't been
adjusted to a longer length.
10. Folding the stroller:
10a. Fold the seat.
10b. Press the second lock and at the same time press the handle adjustment
button, then push down the handle with some strength to unlock the stroller.
10c-10d. Press the handle adjustment button to let the handle descend, now the
stroller is folded and locked once you hear a "click" sound. The stroller can
stand after folding.
16
EN