Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE WORKING SPEED
The unit features two working speeds (1 and 2 button). The second speed is faster than the first one,
For best results and to avoid overheating, it is recommended to use the unit for short and
regular intervals, then for a long time, always making circular movements inside the container
of food. It is also recommended to start processing food from the first speed, ending up using
the faster speed.
CHOPPER
- Assemble chopper set as described in the "Assembling the chopper" section.
- Plug the unit to the electrical outlet.
- Press the button (1 or 2) to start operating.
CAUTION: if you lift the lid from the working bowl, the blade will stop, avoiding any
risk of injury.
- Unplug the unit from the outlet once the process is finished.
This appliance is not suitable for chopping hard foods or ice, as they could
damage the blades. Otherwise, it is suitable for making baby food, milk
shakes, sauces, vegetables, fruits, almonds, etc... When processing fruits or
vegetables, remember to chop them into small pieces and remove pits or
hard rinds.
If you want to prepare baby food, add some water or milk in small
quantity. Do not exceed the maximum capacity of the bowl.
Assembling the chopper set
Assemble the set as shown on Figure 3, 4 and 5.
Assemble the blades (6) to the bowl (5) as shown in Figure 3 and insert the food.
Place the lid (4) by hooking it to the appropriate joints on the container, as shown in Figure 4.
Insert motor body (3) in the lid (4) and rotate the chopper's parts.
WHISK ATTACHMENT
-
Assemble whisk (8) and main body (3) by rotating the whisk counterclockwise
-
Plug the unit to the electrical outlet.
-
Press the button (1 or 2) to start operating.
CAUTION: do not insert your fingers or hair inside the food container.
-
Unplug the unit from the outlet once the process is finished.
The whisk attachment is ideal for creating sauces and cream and for whipping and whisking.
CLEANING
-
Unplug the unit from the electrical outlet.
Do not immerse the motor body in water or other liquids, but wash it with a damp cloth and non-abrasive
detergent. Avoid any infiltration of water inside the motor housing.
Shaft, blades and accessories can be washed like normal dishes, with a non-abrasive sponge and mild
detergent. Dry them thoroughly before assembling them to the main body.
For a quick cleaning of the blades of the shaft during different processes, insert the hand blender into a cup
filled with water and operate for a few seconds.
TECHNICAL FEATURES
•
Power supply: AC 230V
•
2 working speeds
•
Ergonomic motor housing
•
Accessories: immersion shaft, chopper set, whisk attachment, beaker.
~
50-60Hz. 400W
11
Publicidad
