Using The Air Purifier - General Electric AFHC09AM Manual Del Propietário

Using the air purifier.

Packaging must be removed from the HEPA Filter before using your air purifier for the first time.
Pull the top of the front cover toward you and lift
up slightly to remove.
Pull forward on the black Pre-Filter, using the pull
tabs in the middle, and remove it from the unit.
Gently pull forward on the 99.97% True HEPA
Filter to remove it from the unit. Remove the
plastic shipping cover from the filter and discard.
Replace the 99.97% True HEPA Filter in the unit.
If you are choosing to use the Charcoal Filter,
install it in the back of the Pre-Filter now. Slide
the Charcoal Filter under the tabs on the back
side of the Pre-Filter. Install with the Charcoal
Filter facing the 99.97% True HEPA Filter.
6
Pull tabs