Brandani techno 53232 Manual De Instrucciones página 23

and put the cigarette plug(7)
to the cigarette lighter socket(8) in car
.Make sure the switch
is on the proper position "12V"(9)
Your cooler can either cool or heat. The
change from cooling to heating takes
place by a sliding switch (10). The
working state is indicated by integrated
LEDs. Green(11) for cooling, and
red(12) for heating
USING METHOD
1.Make sure the appliance is turned OFF, place the appliance on flat and even,
and at good ventilation place.
2.This appliance is suitable to use in household or inside car: take care to
connect the right power cord accordingly.
2. 1To use in household, connect the AC cord (2) to AC input
at the back of appliance (3) , then connect the power cord to
power supply socket.
2.2 To use in automobile, connect the DC cord (4) to DC output
INSTRUCTION MANUAL