Nexxt Solutions NHE-T100 Guia Del Usuario página 6

Step 3
Label the wires
Mark the corresponding cables before removing the
existing light switch.
Always follow code standards when installing wired
connections.
Note: All the images are for reference only and therefore,
they must not be used as a standard.
NEUTRAL
North American color code standard:
White is for neutral, black represents the live and load wires,
and the yellow/green cable is for grounding.
Note: a single bare copper wire is also used to represent
the ground wire in existing electrical installations
LOAD
LINE
Europe/Australia color code standard:
Blue is for neutral, brown represents the live and load
wires, and the yellow/green cable is for grounding.
LOAD
LINE