Publicidad
STEP 11
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully turn your unit onto its front. Position back panel
as shown. Align squarely with edges of bottom, left panel and right panel. Nail (9) straight
into back edges as shown. Using screws (6), screw on the top of back panel to back side of
top rail.
6
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
6
(x6)
H
O
B
9
(x18)
"raw surface"
E
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
18
9
Publicidad
