Technical Data - IKA EUROSTAR 200 digital Instrucciones De Manejo

Speed range I (high torque)
Speed range II (high speed)
Speed setting
Speed display
Speed setting accuracy
Speed measurement deviation
Max. torque at stirrer shaft
Max. stirring quantity (water)
Max. viscosity
Permitted on time
Nominal voltage
Frequence
Max. input power
Max. output power at stirring shaft
Protection type acc. to DIN EN 60529
Protection class
Excess voltage category
Contamination level
Protection at overload
Fuse (on mains plate)
Ambient temperature
Ambient humidity (rel.)
Drive
Clamping chuck – clamping range
Hollow shaft internal diameter
Extension arm (ØxL)
Housing
Dimensions (WxDxH) (without extension arm) mm
Weight (with extension arm and clamping chuck) kg
Operation at a terrestrial altitude
Subject to technical changes!

Technical data

rpm 0/6-400
0/30-2000
Stepless
7-Segment LEDs
rpm ±1
Speed < 300 rpm: ±3 rpm
Speed > 300 rpm: ±1%
Ncm Range I: 200
Range II: 40
ltr 100
mPas 100000
% 100
VAC 230±10% (EURO)
115±10% (USA)
Hz 50/60
W 130
W 84
IP 40
I
II
2
Yes/motor current limitation
A T 4 A (IKA Ident. No. 2585100)
®
°C +5 to +40
% 80
Brushless motor
mm 0,5-10
mm 10,3
mm 16x220
Coated aluminium casting and thermoplastic plastic
91x209x274
4,6
m max. 2000
21