LEGRAND QMOLEEDZRX Instrucciones De Instalación

No: 070026 – 10/22 rev. 1
Catalog Numbers • Les Numéros de Catalogue • Los Números de Catálogo: QMOLEEDZRX
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
The QMOLEEDZRX Range Extender enhances and extends the range of the Zigbee network, it offers reliable communication between
end devices such as Shade Motors or Remotes and the QZHub3 Controller. The Range Extender is easily paired with other Zigbee
devices and forms a critical part of a broader Zigbee communication network.
The QMOLEEDZRX plugs into a standard 15A wall socket. A regular 15A pass-through socket outlet is provided for additional
convenience – Maximum load 1800W resistive, for loads such as light fixtures. Pass-through outlet is not recommended for motors
loads such as vacuum cleaners, air conditioners or other appliances.
NOTE: For best possible wireless performance we recommend plugging the Extender into a socket at counter height or higher if
possible.
Adding a Range Extender to ZigBee Network
1. When the range extender is initially plugged in the green LED flashes as it searches for the zigbee network.
2. In the Legrand Shades App, select Add Device and then the App will automatically scan for new devices.
3. While the App is scanning for new devices, make sure the green LED on the extender is flashing. If not see instructions below to
reset the extender.
4. Once the Range Extender joins the ZigBee network, the green LED will be solid green to show it has joined a network. After a
few minutes the solid green LED will turn off. From this point on the green LED indicates if the pass-through outlet is powered on.
Press the on/off/reset button on the side of the unit to turn the pass-through outlet on or off.
5. When found any range extenders will show up in the App as a found device and can be renamed to uniquely ID the device.
NOTE: If the range extender does not find the network the zigbee binding search will expire after 5 minutes. To restart the search reset
the range extender - see reset instructions below.
For additional details on using the QMOLEEDZRX with the QZHub3 Controller, see the Qadvanced Roller Shade ZigBee HA1.2
Programming Instructions
Range Extender
Prolongateur de portée
Extensor de alcance
Installation Instructions • Instructions d'Installation • Instrucciones de Instalación
PRODUCT DESCRIPTION
LED
(Behind Faceplate)
SPECIFICATIONS
Voltage
Input ................................................................. 120VAC, 50/60Hz
Output ............................. 120VAC, 15A Max, 1800 W (Resistive)
LED Status Indicator .....Network joined/ pass-though outlet power status
Operating Environment ..........................................32–120°F (0–40°C)
..............................................................................indoor use only
Dimensions .............................2.7 x 1.5 x 1.3 inches (68 x 38 x 33mm)
Weight .............................................................................2.6 oz (73.5g)
Certifications ......................................................UL/cUL listed, FCC, IC
To reset the range extender, hold the Reset
button for 3 seconds until LED flashes red.
On/Off/Reset
Button