Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
1.
The appliance must be disconnected from the power source before cleaning.
2.
Clean the appliance only with a slightly damp cloth.
3.
Remove the plug from the kettle and take it out of the holder.
4.
After removing the kettle from the main unit, fill 2/3 of the kettle with hot soapy
water.
5.
Allow the kettle to soak for 15-20 minutes to loosen the grease. (Thesoaking time
may vary depending on the degree of soiling).
6.
Remove the water. If necessary, remove any residue with a cloth.
7.
Rinse the interior carefully and then dry it. Clean the outside with a damp cloth and
then dry it.
8.
Before using again, make sure that all components, the connection
socket on the kettle, are absolutely dry and free of residual moisture.
Note: Never immerse the kettle in liquids. Always clean everything by
hand. Do not put any components in the dishwasher. Always allow the
appliance to cool down before cleaning and after use, otherwise there is
an acute risk of burns!
5
Publicidad
