Bonsaii L411-A Manual De Instrucciones página 11

4. Lay the document to be laminated into a lamina ng pouch of the appropriate
size. Make sure that all corners of the document have at least two millimeters
of space from the edge of the lamina ng pouch.
5. Now lay the lamina ng pouch, sealed side first on the pouch tray ❽ .
Adapt the pouch posi oning aid ❾ to the pouch size used and push the
pouch slowly into the pouch input slot ❺ . Guide the pouch into the laminator
un l it is gripped and pulled in by the rollers.
6. The completed laminated pouch is ejected from the pouch ejector slot ❻ .
Make sure there is enough free space in front of the device to let the pouch
exit without obstruc on. Allow the laminated pouch to cool down for at least
one minute before touching it.
Jammed pouches
In case the pouch may be pulled in at an angle or jam itself inside the device
please proceed as follows.
1. Press the an -blocking switch ❼ and the transport of the pouch will be
stopped.
2. The laminate pouch is not pulled in any further.
3. Remove the lamina ng pouch by hand.
4. Re-start the lamina ng process.
Maintenance and cleaning
Unplug the appliance from the wall outlet. Allow the unit to cool down. The
outside of the unit can be cleaned with a damp cloth. Do not use solvents or
flammable materials for cleaning. To clean the internal parts of the unit from
possible contamina on, a ma e cardboard of approx. 250 g/m or a special
blo ng paper can be used. Run the sheets through the warm machine to
remove any residue from the rollers.
10
2