Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Please read the instructions carefully and use them, safekeeping.
A LETTER FOR USERS
Dear users:
Thank you for choosing our products. To prevent the electric shock, fire injury and other
serious accidents, read the following instructions carefully before use, please find us as
contacts information as below no matter there is any questions, thanks.
Due to the products improvement, the product you bought maybe it is a little bit different
from those description in the manual, sorry for that.
PRECAUTIONS: PLEASE READ AND FOLLOW THE FOLLOWING SAFETY INSTRUCTIONS
1. This product is not waterproof.
2. Please keep the external operating temperature of this product within the range of
0-35ºC.
3. During installation and use, please do not use excessive force or wrong force.
4. Please do not use this product where the power supply is unstable.
5. Please do not install it near other electrical appliances.
6. High surface temperature in a short period of time after use and power off. Do not
touch it at will. Please wait for it to cool completely before carrying out relevant
operation.
7. Excessive bending and binding of the power cord is strictly prohibited. If the power
cord is damaged (exposed wire, broken wire, etc.), please stop using it immediately.
8. Do not look at the led light directly when it´s working.
9. Turn on the light, there will be a short delay, this is a normal phenomenon.
10. When the electronic ballast is working there will be have a little sound.
11. Please pay attention to keep the lamps and lanterns clean and tidy, water stains
corrosion lamps and lanterns. Make sure that no dust gets inside the body lamp. If
dust or ash falls on it, use a blower to remove it.
12. If it is not used for a long time, please place it in a dry and ventilated place.
MAINTENANCE AND AFTER-SALES SERVICE
All the products sold by our company are brand new with superior quality, and we offer 2
years warranty for our products.
During warranty period, if the products need to repair, please contact the local shop or
factory for after-sales service. In addition, in order to avoid damage on the transport
please be sure the good is well-packed.
During expired warranty or it´s not because of the good's quality cause the damage,
please contacts with the local shop or factory for repair, it may need to pay the
accessories cost or a certain maintenance fee.
COMPONENTS
- LED lamp with integrated fan.
- Metalic holder with plastic bracket.
- aquaControl controller Wi-Fi.
- Power adapter 24V, 4.5A
PRODUCT SPECIFICATIONS
LEDS
POWER
MEASURES
(Nº)
90W
91
20x12x3,3cm
HOLDER
HORIZONTAL HOLDER
LUMENS
HEIGHT
2002
30cm
VERTICAL HOLDER
EXTENSION
EXTENSION
21-28cm
13-24cm
Publicidad
