primewire 305031 Manual Del Usuario página 6

Thank you for choosing a primewire product. Please read the following user man-
ual carefully so as to get the most from the product you have purchased. Before
using the product, first check that the delivered item is complete, accurate and
undamaged.
1. Scope of delivery
• USB 3.2 Hub Gen1
• DC coaxial power connector (5.5 mm)
• User manual
2. Technical data
Power supply
Output voltage
Ports
3. Initial use
Check that the product and the components are intact and that the device is work-
ing properly when using it for the first time Take the device out of the original
package and remove all the packaging material. Connect the USB 3.2 hub to a USB
3.2 port on your computer. You then have to connect the DC-coaxial power adapter
to a properly installed socket and to the coaxial connector port of the USB hub. You
can then connect up to four USB 3.2-enabled devices to the hub and charge two
devices via the "Power" ports (red).
When charging the devices, please note the voltage specified on the type plate and
ensure that it matches the output voltage of the USB hub.
Note: Caution! The red connectors are designed exclusively for charging 5V USB
devices and cannot be used for data transfer.
6
12V2A via DC-coaxial power adapter (5.5mm)
5V / 2.4A (each 12W, total 24W)
6 USB 3.2 Gen 1 Type A:
4 Data (blue)
2 Power (red)
English