Watching Tv; Turning On/Off The Power; Initial Installation - Sharp Electronics LC-32LE551U Manual De Operación

Watching TV

Turning On/Off the Power

Press POWER on the TV, or POWER on the remote control unit to turn the power on.
POWER button
POWER
INPUT
1 2 3
4 5 6
7 8 9
POWER
button
0
ENT
DIS P LAY F RE E Z E AUDIO FLASHBACK
* for LC-32LE551U/LC-32LE451U/
LC-39LE551U
NOTE
• The Initial Installation starts when the TV powers on for the first time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of the Initial Installation, perform "Easy setup" on the Initial
Setup menu on page 22.
Press POWER on the TV, or POWER on the remote control unit again to turn the power off.
• The TV enters standby and the image on the screen disappears.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.

Initial Installation

When you turn on the TV for the first time, the Easy Setup will guide you through the setup process. Perform
the following steps before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 6.)
2. Connect the antenna cable to the TV. (See page 6.)
3. Plug in the AC cord to the AC outlet. (See page 5.)
12
Language Setting
Select from among 3 languages: English, French and Spanish.
1
Press t/u to select the desired language listed on the screen, and then press ENTER to continue to the
POWER
button
TV Location Setting
* for LC-48LE551U
Select "Home Mode" or "Store Mode" for the location where you plan to install the TV. This product qualifes
for ENERGY STAR in Home mode default setting.
2
Press c/d to select "Home Mode" or "Store Mode".
Time Zone and Daylight Saving Time Settings
Make settings for the time zone and daylight saving time where you use the TV.
3
Press c/d to select the time zone where you are using the TV, and then press ENTER to continue to
next step.
Menu Language
Language selection
Language:
Change
ENTER Select
Press ENTER to continue to the next step.
TV Mode
Mode selection
Mode:
Change
ENTER Select
the next step.
Time Zone
Set your time zone
Time Zone:
Change
ENTER Select
• The time zone differs depending on the selected country.
• The factory preset value is the time zone for the capital of the selected country.
English
EXIT Exit
Home Mode
RETURN Previous Step EXIT Exit
Alaska
RETURN Previous Step EXIT Exit