Bemma MONTAUK Instrucciones De Ensamblaje página 7

S T E P 5
I n s e r t i n g D r a w e r ( i f r e q u i r e d )
1. Pull drawer glides all the way out
2. Locate the hole at the back of the drawer box
3. Insert the hole into the peg located at the back of the slide
and slowly place the drawer box onto the extended slides
4. Hold the lock handle while pushing inwards to lock in place
5. Ensure the drawer guide is fitted well into the lock
6. Adjust the slides as seen in step 3 (if needed)
1 (833) 66 BEMMA
customercare@bemmadesign.com