Publicidad
Idiomas disponibles
Idiomas disponibles
Installing AC Adapters
Step 4: Arrange adapters in decided configuration, leaving just
enough cable length sticking out of the port to plug in
the devices.
TIPS: Adapters can often be installed just as they come bundled
in the box. For example, the adapter in figure (F) comes with the
cable wrapped around the adapter. If the cables are not bundled
at all, twist ties or Velcro ties may be helpful.
If the devices have particularly large AC adapters (approximately
5" x 2" x 1.25") the adapters will fit snug in the tray. In this case it
may be best to arrange the majority of the adapters as far back
in the tray as possible from left to right (D), flipping about half
on their side. Contact JAR Systems for additional assistance.
Step 5: Plug the charger into the power strip. For best results,
bundle any excess cable length if it is not already (G).
Step 6: (OPTIONAL) Place a security screw in the center of the
shelf to prevent adapters from being removed (H).
CSE Padlock Kit Assembly
A
B
4.
For Additional Support Call: 866.393.4202 or Email: Support@JAR-Systems.com
(Cont.)
(Sold Separately)
Installing Padlock Brackets
1. Unplug the white plastic hole caps. (A)
2. Attach each of the brackets with 2 screws with the included
torx key. (B) The screws are attached from the inside of the
station and door.
3. Put the padlock through the bracket to secure the station.
F
G
H
Publicidad
