Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly or operation of product,
make sure all parts are present. Compare parts with
package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate
the product. Contact Customer Care for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
PACKAGE CONTENTS
Part
Description
Qty
A
Light set
1
Dusk to
B
1
dawn sensor
C
Transformer
1
OPERATION INSTRUCTIONS
Step 1. Connect the sensor to the
transformer by pushing the plug into
the transformer socket and hand
tighten the nut around the plug and
socket to secure.
• If you do not want to use the
sensor, connect the lights to the
transformer in the same manner
and skip to step 4.
6
Visit WWW.TOTALPOND.COM for information and tips.
A
B
C
1
transformer
plug
from
sensor
Step 2. Connect the lights to the
sensor by pushing the plug into the
sensor socket and hand tighten the
nut around the plug and socket to
secure.
Step 3. Make sure that the
transformer and sensor are not
submerged and the sensor is facing
up.
• NOTE: At night, the lights will
automatically turn on. At sunrise,
they will automatically turn off.
Step 4. Place the lights in or out of
the pond. Plug the transformer into a
properly grounded electrical outlet.
SPECIFICATIONS
Power Consumption
0.16 watts per light / 12 volts
10 ft. cord from transformer to first light
Cord Lengths
4 ft. between lights
Please call Customer Care before returning item to store: 1-888-412-6001
2
sensor
plug
from
lights
3
4
GFCI
outlet
7
Publicidad
