Descargar Imprimir esta página

Matco Tools MCL1614HPID Instrucciones De Operación página 7

Atornillador neumático de alta potencia hexagonal sin escobillas 16v 1/4"

Publicidad

Idiomas disponibles

Idiomas disponibles

MATCO MCL1614HPID TOOL
Matco warrants this tool for a period of 2 years to the
consumer. We will repair/replace at our discretion any tool that
is found to be defective during the warranty period. In order
to have your tool repaired, return the tool to any of Matco
authorized warranty centers listed, freight prepaid. Please
include a copy of your proof of purchase and a brief description
of the problem. The tool will be inspected and if any part or
parts are found to be defective Matco will repair/replace under
warranty.
Defective products must be returned and analyzed by VIS Repair
and Service for the United States or HT Pneumatic Rebuilders
for Canada, at the addresses listed below, freight prepaid. Any
tool that has been serviced by the user or by an unauthorized
service center will subsequently void the warranty of the tool.
This warranty does not apply to damage that Matco determines
to be caused from repairs made or attempted by anyone other
than Matco authorized Repair centers. Misuse, abuse, normal
wear and tear, and lack of maintenance do not constitute
warranty.
MCL1614HPID
MCL1614HPID 16V 1/4" High Power Impact Driver
MATCO CORDLESS WARRANTY
MATCO16V LITHIUM-ION
BATTERY MCL1620LB / CHARGER MCL16CHRG
Matco Tools warrants its 16V Lithium-ion (battery/charger) to
be free from defects in material and workmanship for a period
of (2) years from the original date of purchase. Registration is
required through your local authorized Matco distributor and/
or by submission of completed registration form included
with the product. If the battery/charger should fail within the
warranty period, it must be returned and analyzed by VIS Repair
and Service for the United States or HT Pneumatic Rebuilders
for Canada, at the addresses listed below, freight prepaid. A
battery capacity defect could be defined as the battery no
longer accepting a charge, or holding a charge for the battery
manufacturing specified period as determined by Matco Tools
Repair center. Based on the evaluation, Matco Tools, at their
discretion, will either repair or replace any batteries to be found
defective in material or workmanship at no charge. Please see
Matco Battery Care Guide in the Cordless Operating Manual for
any of the Infinium products. You will find helpful tips that may
maximize the useful life of your battery.
Address for Returns as follows:
VIS Repair and Service
315 Hawkins Rd.
Travelers Rest, SC 29690
(864) 660-8286
HT Pneumatic Rebuilders
22 Goodmark Place Unit #8
Toronto, ON M9W 6R2 Canada
(416) 231-0172
7
09/22/17

Publicidad

loading