Intellinet 561426-V3 Instrucciones página 3

Instructions
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesn't indicate a link or activity, check the
corresponding device for proper setup and operation.
LED
PWR
SYS
Link / Act
1–24, 25T–28T
PoE
1 – 24
25S–28S
(SFP)
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address
field. The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Color
Green
Blinking
Green
10/100M: Orange;
Blinking
1000M: Green
Orange Blinking
Green Blinking
Status
On
Off
System is booting or has booted successfully.
Off
On
Data transmitted/received.
Off
On The connected device is receiving power.
Off
On
Data transmitted/received.
Off
Operation
Unit is receiving power.
Check connection.
System not started.
Valid port connection.
No link established.
Abnormal power supply.
No PD device is linked.
Valid port connection.
No link established.
3
English