Important Safety Instructions; General Installation Conditions - Televes INNOVA BOSS 130201 Manual De Instrucciones

INNOVA BOSS
EN

Important safety instructions

General installation conditions:

Before handling or connecting the equipment, please read
this manual.
In order to reduce the risk of fi re or electric shock, do not
expose the equipment to rain or moisture.
Do not open either the antenna nor the AC adpater without
disconnecting it from the mains.
The equipment must not come into contact with water
or even be splashed by liquids. Do not place containers
with water on or near the equipment if it is not adequately
protected.
Do not place the equipment near sources of heat or in
excessively moisture conditions.
Do not place the equipment where it may be aff ected by
strong vibrations or knocks.
How to use the equipment safely:
The antenna can be powered either through the jack socket
or through the male IEC connector with 5 to12V
mA.
If any liquid or object falls inside the AC adpater, please
contact a specialized technician.
To disconnect the AC adpater from the mains, pull from the
body of it, and never pull from the cable.
Do not connect the AC adapter to the mains until all other
connections have been completed.
The mains socket to plug the AC adapter should be located
nearby and should be easily accessible.
Description of the electrical safety symbols:
/ I 40
To avoid the risk of fi re or electric shock,
do not open the AC adapter.
This symbol indicates that the AC adapter
complies with the safety requirements for
class II equipment.
This symbol indicates that the equipment
complies with the requirements of CE mark.
Only indoor use.
6