Publicidad
OPTIONAL
Trailer Simulator
for 7- and 13-pin
Sockets
Part-no.
50400517C
13
13,3 V
ON
12,8 V
12,3 V
OFF
IMPORTANT!
The Voltage Control Module (VCM) in this kit is designed to be self switching at a pre-set voltage input.
With the engine started, the switched output (e.g. caravan fridge or alternative), pin 10, will switch on
at a preset figure of 13,4 volts.
When the engine is switched o , the switched output will remain live until the vehicle battery voltage
drops to a preset figure of approx 12,7 volts.
NOTE: The cut-o voltage depends on the condition of the vehicle battery, power consumption of the
fridge etc. In all cases, the cut-o figure is preset so the vehicle engine can be started at any time.
/
87130804/28.08.2019
PF Jones Ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- info@pfjones.co.uk web- www.pfjones.co.uk
everse
everse
PIN 10
GB
8/9
Publicidad
