Luxia OCEANO 35 Manual De Uso Y Mantenimiento página 41

PROBLEM
Too much foam.
Insufficient drying.
When operating the main
switch, the machine does
not switch ON.
When switching the machine • No connection to the water
on, there is no water loading.
When the loading tap is
opened, the machine does not
load any water.
Water on the floor.
When pressing the start
button, the machine
does not start.
The machine keeps on
loading water.
Despite the light on the
ON/OFF switch being red,
the machine does not work.
Operating and service manual
POSSIBLE CAUSE
• Washing temperature lower
than 55°C.
• Too much rinse aid.
• Rinse aid pump not
aspirating.
• Too low water temperature.
• Burnt out fuses.
supply system.
• Problems with the
electromagnetic valve or with
the loading hose/pipe.
• Loading or draining hoses
broken or squashed.
• Door open.
• Microswitch button stuck.
• Manostat broken or wrongly set.
• Electromagnetic valve broken.
• Overflow pipe not inserted.
• The indicator is mechanical,
therefore it can show red even if
there is no power in the machine.
OCEANO 35/40/50/60
English
REMEDY
• check that the tub water heating
element is working properly.
• Have the rinse aid measure
reduced by specialized
personnel.
• Check the amount of rinse aid and
have the pump checked by
specialized personnel.
• Wait some more time between cycles,
so that the temperature can return
to optimal values, or check that the
boiler heating element is working
properly
• Check the fuses.
• Make sure the water tap is open
and that water is being supplied
by the water system.
• Check the electromagnetic valve
or the loading hose.
• Check the loading and draining
hoses.
• Close the door.
• Check the microswitch.
• Check the manostat.
• Replace the solenoid valve.
• Insert the overflow pipe.
• Check that there really is
power on you mains panel.
pag. 41 di 116