Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: TO PREVENT ELECTRIC SHOCK,
this product has a polarized two prong plug (one blade is
wider than the other) that must be fully inserted into a
matching properly grounded outlet. This plug is designed to
fit a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If the plug still does
not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
WARNING: Before servicing this fan be sure to unplug fan from wall outlet. Do not only turn off fan from the
main "ON/OFF" switch, be sure to unplug this fan.
ASSEMBLY INSTRUCTIONS:
Simple assembly is required to use this fan
1. Slide Clip-on Base onto fan (Fig.1)
2. Inset Thumbscrew and tighten (Fig.2)
3. Clip Base Clamps onto Table Base (Fig.3)
WARNING: ELECTRICAL SHOCK HAZARD Do not use
with damaged cord or plug. Use with adequate
electrical system that is up to code.
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, do not use this product with any solid‑state
speed control device.
Fig. 1
Fig. 3
~ 3
Fig. 2
Publicidad
