Cd/Usb/Ipod/Android - Kenwood KDC-X701 Manual De Instrucciones

CD/USB/iPod/ANDROID

Start playback
The source changes automatically and playback starts.
CD
Label side
USB
CA-U1EX (max.: 500 mA)
(optional accessory)
iPod/iPhone
USB 1 cable from the
KCA-iP102/KCA-iP103 (optional
rear of the unit
accessory) *
(USB input terminal).
iPod/iPhone *
/
ANDROID
:
You can also connect to
the USB 2 cable from
Micro USB 2.0 cable *
the rear of the unit
(commercially available)
(USB input terminal).
* 1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
* 2
Do not leave the cable inside the car when not using.
M Eject disc
Selectable source:
•
•
To
Playback/pause
Reverse/Fast-forward *
Select a track/file
Select a folder *
Repeat play *
1
or accessory of the
2
Random play *
* 3
2
*
3
* 4
* 5
* 6
* 7
/ : CD/USB 1/USB 2/iPod 1/iPod 2/ANDROID 1/ANDROID 2
/ /
On the faceplate
Press
4 Press and hold S / T.
Press S / T.
5 Press J / K.
6 Press
TRACK REPEAT/ALL REPEAT
FILE REPEAT/FOLDER REPEAT/ALL REPEAT : MP3/WMA/AAC/WAV/
FILE REPEAT/FOLDER REPEAT/REPEAT OFF : iPod or ANDROID
6 Press
DISC RANDOM/RANDOM OFF
FOLDER RANDOM/RANDOM OFF : MP3/WMA/AAC/WAV/FLAC file,
Press and hold
When connecting an Android device, "Press [VIEW] to install KENWOOD MUSIC PLAY APP" is shown. Follow the
instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application
on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
For ANDROID: Applicable only when [BROWSE MODE] is selected. ( 10)
For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
For iPod/ANDROID: Applicable only when [MODE OFF]/[BROWSE MODE] is selected. ( 10)
For CD: Only for MP3/WMA/AAC files.
: CD/USB/iPod USB/ANDROID
On the remote control
.
Press
Press and hold S /
Press S /
Press
repeatedly.
: Audio CD
FLAC file
repeatedly.
: Audio CD
iPod or ANDROID
to select ALL RANDOM. *
.
.
.
/ .
7
9
ENGLISH