Power Dynamics BGB50 Manual De Instrucciones página 4

OVERVIEW
CONNECTION
Connect the DC adapter to the speakers and connect to the 110V~230V AC power. Then you can turn on power switch. The
status indicator LED will be red and fast blinks, after about 10 seconds the speaker will sound a tone, it means the speaker is
ready.
AUX CONNECTION
When there is no BT connection, you can use the aux input.
CONNECT BT-DEVICE
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.
1. Set the search function on of the BT device you want to play the music. See the operating
instructions for that device..
Find on your BT-device "Power Dynamics" and make the connection.
2.
1. Power switch
2. DC Power connector
3. Speaker output connector for passive speaker
4. Aux input Jack
5. LED indicator
4