Campbell Hausfeld PA210100AV Manual De Instrucciones De Operación Y Lista De Partes

Operating Instructions and Parts Manual
Pressure Regulator
Model PA210100AV
Description
The self-relieving pressure regulator can be used
between the air supply and an air tool to control the
air pressure on lines. The regulated output pressure
range is 0-215 PSI.
Unpacking
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit.
Make sure to tighten fittings, bolts, etc., before
putting unit into service.
Read & Follow all InstRuctIons
save these InstRuctIons
do not dIscaRd
Safety Guidelines
This manual contains information that is very
important to know and understand. This information
is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this
information, observe the following symbols.
situation which, if not avoided, WILL result in death
or serious injury.
situation which, if not avoided, COULD result in
death or serious injury.
situation which, if not avoided, MAY result in minor
or moderate injury.
not followed, may cause damage to equipment.
© 2012 Campbell Hausfeld/Scott Fetzer
Danger indicates an
imminently hazardous
Warning indicates a
potentially hazardous
Caution indicates a
potentially hazardous
Notice indicates
important information, that if
For parts, product & service information visit
www.campbellhausfeld.com
Figure 1 - Pa210100av
Specifications
Regulator
Style . . . . . . . . . . . . . . . Relieving
Temperature
Range . . . . . . . . . 40°F to 140°F
Maximum
Pressure . . . . . . . . . . . . . 250 PSI
Air Inlet/Outlet . . . . 3/8 inch NPT
Rated Flow . . . . . . . . . . 48 SCFM
IN738700AV 9/12
Self