Publicidad
Idiomas disponibles
Idiomas disponibles
POWERSUPPLY
On the label on the backside of the light effect is indicated on this type of power supply must be connected.
Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be
irreparably damaged. The light effect must also be directly connected to the mains and may be used. No
dimmer or adjustable power supply.
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics.
Make sure the area below the installation place is free from unwanted persons during servicing
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from
any deformation
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should
be cleaned monthly.
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified worker!
DISPLAY AND PANEL
Buttons:
MENU
Back to Main Menu
UP
Menu function UP
DOWN
Menu function DOWN
Save selected function
ENTER
Publicidad
