Fenton SHF505B Manual De Instrucciones página 4

UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
REAR PANEL
1.
TONE CONTROL
Using the bass and treble knobs, the
overall system frequency response can be
adjusted.
2.
POWER ON/OFF
Turns the device on/off.
3.
DC ADAPTER INPUT
Connect the included power adapter to
this input and connect the other end of the
cable to the correct power source.
4.
LEFT SPEAKER OUTPUT
RCA connector for slave speaker (left).
5.
CD/DVD AUDIO INPUT
RCA input left and right.
6.
PC AUDIO INPUT
3.5mm mini jack input.
7.
INPUT CHANNEL TOGGLE SWITCH
Switch to toggle between CD/DVD and
PC input channels.
8.
USB PORT
USB entry port.
TOP PANEL
CONNECTING WITH BT
1.
2.
3.
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.
Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device.
Press the "MODE" button and activate BT-function.
Select "FENTON" on your BT-device and make the BT-connection
1.
MODE
Press to switch modes between AUX,
USB and BT.
2.
VOLUME DECREASE
Press to decrease volume.
3.
PREVIOUS TRACK
Press to change to the previous track (in USB
and BT mode).
4.
PLAY/PAUSE
Press to start- or pause play (in USB and
BT mode).
5.
NEXT TRACK
Press to change to the next track (in USB and
BT mode).
6.
LED INDICATOR
Indicator showing current mode by color: RED
means AUX, BLUE means BT and
PURPLE means USB.
7.
VOLUME INCREASE
Press to increase volume.
4