Beamz professional WH128WI Manual De Instrucciones página 18

Static mode – Set the static color mode and strobe mode
Press MENU, press the UP or DOWN button until "Stat" is displayed, press ENTER.
You have now 5 options. To select the desired option press ENTER. With the UP and DOWN button the desired
value can be set. Press ENTER to confirm the desired value
Color mode – Built-in color mix
Press MENU, press the UP or DOWN button until "Colo" is displayed, press ENTER.
"Coxx" will now be displayed, ("xx" representing a number between 0 - 51). Press the UP or DOWN button to find
the desired static mode. Press ENTER to confirm
Auto mode – This menu will let you select the desired auto mode.
Press MENU, press the UP or DOWN button until "Auto" is displayed, press ENTER.
There are 10 auto modes, press the UP or DOWN button to select the desired mode, press ENTER to confirm.
After confirming "SP x" will be displayed ("x" representing a number between 1 - 9). With this option the speed of
the selected program can be changed
Channel mode – Select the desired channel mode
Press MENU, press the UP or DOWN button until "Chnd" is displayed, press ENTER
"X Ch" will now be displayed, ("X" represents the selected channel mode, 1, 4 or 8 channels DMX). Press the UP
or DOWN button to find the desired channel mode. Press ENTER to confirm
DMX Address – Set the DMX address
Press MENU, press the UP or DOWN button until "Addr" is displayed, press ENTER.
"Axxx" will now be displayed, ("xxx" represents the selected start address). Press the UP or DOWN button to
select the desired start address. Press ENTER to confirm
Password – Password function
Press MENU, press the UP or DOWN button until "PASd" is displayed, press ENTER. press the UP or DOWN
button to select "OFF" or "ON", confirm with ENTER. When set to "ON" the password will be activated. No
changes can be made to the Menu. The password is: "MENU, UP, DOWN, ENTER" (press these buttons directly
after another)
Info – Will display the software version and working time of the unit.
Press MENU, press the UP or DOWN button until "Info" is displayed, press ENTER.
The software version of the unit will now be displayed. Press ENTER again to see the numbers of ON time of the
unit
Slave mode – In this mode the unit functions as a slave
Press MENU, press the UP or DOWN button until "Slav" is displayed, press ENTER.
"Sla" will now be displayed, Slave mode is confirmed. The unit will now act as a slave in Auto, sound and chase
mode.
Wireless DMX (W-DMX™)
To activate the wireless DMX press MENU and UP or DOWN button until "U-d" is showed in the display. Press
ENTER and activate (ON) or de-activate (OFF) the wireless DMX function with the UP or DOWN buttons.
W-DMX™ standard
Remarks: Wireless DMX only functions with
18