Publicidad
DVBT010SXT2
Troubleshooting
PROBLEM
POTENTIAL REASONS
Power isn't connected
No picture
The power switch is not on
Screen Shows
Not connect DVB-T cable
„No Signal„
Incorrect setting
No or incorrect connection with audio cable
No sound from speaker
Mute the sound
Incorrect sound track
Only sound, no Image on
No or incorrect connection with AV cable
the screen
Program is a radio program
The battery is exhausted
Remote control is not
Remote control unit is not in the right opposite of the
workable
front panel or too far from it
The image stop
The signal i too weak
Suddenly or mosaic
Specification
ITEM
Input Frequency
Video
Audio
Power
SUB ITEM
Input Frequency
FR Input level
IF Bandwidth
Modulation
Decoder Format
Output Format
Output Port
Decoder Format
Audio output
Voltage
POWER
10
WHAT TO DO
Connect the power
Switch on the power
Plug in the DVB-T cable
Set up correct parameter
Connect the audio cable correctly
Switch on the correct, volume control
Try another sound track
Connect the video cable correctly
Press TV/RADIO key to shift into TV mode
Change new battery
Adjust the way of holding remote control unit
and get near to the panel
Strengthen the signal
PARAMETER
170-862MHz
-20~78dBm
7MHz
QPSK, 16QAM, 64QAM
MPEG-2(ISO/IEC 13818-2)
MPEG-4(ISO/IEC 14496)
H.264 (ISO/IEC 14496-10)
1080i@30fps
4:3,16:9, Letter Box
1920*1080i, 1280*720P, 720*576i
SCART, HDMI, AUTIO L/R
MPEG-1&MPEG-2(layer1&layer2)
AAC,AAC+/HE-AAC,AC3
Digital audio: S/PDIF
100~240V,50~60HZ
Max 6W / standby < 0,5W
EN
Publicidad
