Hillsdale Furniture Kerstein 1995-570 Instrucciones

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product is designed for residential use only.
HARDWARE LIST
A (10) M8*50mm Bolts
B (10) M8 Spring Washers
C (14) M8 Flat Washers
D (4) M8 Nuts
E (1) Ø5 Allen Wrench
F (1) Ø5 Open Wrench
PARTS LIST
G (1) Headboard Panel
H (2) Headboard Legs
G
H
C
C
B
B
A
A
STEP 1 - Figure 1
Begin assembly by attaching Legs (H) to
Headboard (G) using 3 Bolts (A), 3 Spring
Washers (B) and 3 Flat Washers (C) per side.
Tighten all bolts with Allen Wrench (E) provided.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
UPH / STORAGE / ADJUSTABLE / HEADBOARD
H
FIGURE 1
H
C
B
A
Queen
King
PART QTY
A 10
C 14
E 1
H
Holes for
Regular
Bed Frame
Side Rails
(Sold Separately)
Back
of Leg
STEP 2 - Figure 2
Next attach Side Rails (sold separately) onto
Legs (H) using 2 Bolts (A) and 2 Flat Washers
(C) on the front and 2 Hex Nuts (D), 2 Spring
Washers (B) and 2 Flat Washers (C) on the back.
Tighten all bolts with Allen Wrench (E) provided.
Tighten all nuts with Open Wrench (F) provided.
HARDWARE PART QTY
B 10
D 4
F 1
H
The Bed Frame
included. Sold Separately
H
D D
B B
C C
Page 1 of 1
HARDWARE
* *
is not
FIGURE 2
C C
A A