Publicidad
Idiomas disponibles
Idiomas disponibles
Paper Shredder
Sheet Capacity
Operating Instructions
Installation
Paper Shred Size
Warning
Operation
Paper Entry Width
Maintenance
Troubleshooting
Credit Card Capacity
Service Center
Voltage
Limited Warranty
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rate voltage may reduce capacity.
INSTALLATION
Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal. Make sure the
basket door is securely closed shut. Shredder will not function unless the pull-out wastebasket is pushed
in all the way and properly set back into place (FIGURE 1).
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
It is not designed to operate with any other wastebaskets. The supplied wastebasket activates this switch,
which allows the shredder to be operable. Lining the wastebasket with a plastic bag will interfere and
may keep the shredder from functioning.
Caution: Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
8 Sheets of 20lb. bond paper*
7/32 in. x 1 27/32 in. pieces
(0.56 cm x 4.7 cm pieces)
8.7 in / 22.0 cm
1 at a time
120V~60Hz / 2.2 A
FIGURE 1
3
Publicidad
