Control Panel
Fan
• AUTO
• HIGH – High speed indicator
• MED – Mid speed indicator
• LOW – Low speed indicator
Mode
• AUTO
• COOL – Cool indicator
• HEAT – Heating indicator (cold wind type unit without this display)
• DRY – Dehumidify indicator
• FAN – Fan indicator
Extra Features
• TIMER – Time indicator
• SLEEP – Sleep indicator
• SWING – Swing indicator
Note: This icon is for all the buttons and display. Base models may not feature all the
functions & modes.
Function Buttons
Button. Press this button to make the unit start or stop.
1
"–" or "+" Button. Press "–" or "+" button to make the room setting
2
temperature decrease or increase. Press "–" and "+" together for 3 seconds to
choose between Celcius and Fahrenheit.
Button. Each time you press this button, a mode is selected in a sequence that
3
goes from AUTO › COOL › DRY › FAN › HEAT.
Button. This button is used for setting fan speed in the sequence that goes
4
from AUTO › HIGH › MED › LOW.
The running time of the unit has reached 250 hours, the filter reset indicator light
will illuminate, and it means the air filter should be cleaned. After cleaning, you can
press the
button, the filter reset indicator light will turn off and the running time
will be cleared.
If you do not press the
indicator light will always illuminate except the unit is power off.
auto
cool
swing
timer
sleep
mode
auto
swing
timer
sleep
mode
button when the filter reset indicator light illuminates, the
dry
fan
heat
2
auto
hi
med
heat
1
filter
fan speed
on•off
reset
3
auto
1
filter
fan speed
on•off
reset
4
7