Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
7b.
Option 2: Attach the support rail (H) to the bottom of the leg (B) and
leg (E) using four M8x15L bolts (BB) and four M8 washers (CC).
Finger tighten only.
B
8.
Square the workbench and then securely tighten all fasteners with a
10 mm and 13 mm wrench.
Note: Use caution to not overtighten.
Note: Use caution to not overtighten.
9.
Screw the four leveling feet (D) or casters (I) all the way into the leg
assemblies to the maximum depth. Some adjustment may be
necessary after the workbench is in the desired location to properly
level and use the product.
Note: Leveling feet have been pre-assembled on the leg.
Note: Use caution to not overtighten.
Caster installation
I
B
CC
BB
H
E
E
7
Leveling feet installation
D
B
10.
Using two or more people, stand the workbench in its upright
position.
11. Install the crank handle (C) into the shaft in the corner below the
wood top as shown.
Or
C
E
Publicidad
