Maxus PW2515 Instrucciones De Funcionamiento página 6

Pressure Washer
Pre-Operation (Continued)
Figure 6 – Connect high pressure hose to pump
6. Connect the high pressure hose to the pump outlet (See
2 and 6).
7. Attach the lance to the gun (see
Figure 7– Attach lance to gun
8. Install quick connect tip by pulling back on collar and pressing
in tip. Release collar, make sure it completely returns to its
forward position and tip is secure (see
Pull collar back
Figure 8 - Installing Quick Connect Tip
www.chpower.com
Figures
Figure 7).
Figure 8).
9. Install quick connect tips to tip holder and secure to the
pressure washer handle. See
Figure 9 - Insert spray tips into the rubber tip holder
TRIGGER SAFETY LATCH
In the engaged position, the trigger safety latch prevents the
gun from being triggered accidentally. Push the latch fully up to
engage it (See Figure 10).
Always engage the trigger safety latch when the unit is not in
use.
Engaged
Figure 10a - Trigger locked
6
Figure 9.
Disengaged
Figure 10b - Trigger unlocked