i-tec C31QUATTRODOCKPDUK Manual De Instrucciones página 13

Manual EN
By selecting the "Set this monitor as primary" field, you select the additional
monitor as the primary monitor. By clicking on the second monitor and moving it
you can position this monitor as required relative to the original monitor of your
laptop / tablet.
Placing one additional monitor to the original laptop / tablet monitor
The Standby / Hibernate mode and the Video port – after the activation of the
laptop / tablet from the Standby / Hibernate mode the primary (original) monitor
is displayed, for this reason we recommend using the monitor that is integrated
with the laptop / tablet as the primary monitor, so that you can log on to the
system again.
The Mirror mode – the additional monitor takes on the parameters of the original
monitor in the system, i.e., if you select the Mirror mode and the original monitor
resolution is e.g. 1280x1024 then the screen will be displayed on the additional
monitor with a resolution of max. 1280x1024 (even if you set a higher resolution).
Pressing the keys „Windows" + P you can also easily control the monitors (this
keyboard shortcut works only from Windows 7 and higher). For using a monitor
in Windows 7 you can select: Computer Only, Duplicate, Extend, and Projector
Only. For using a monitor in Win 8 / 8.1 / 10 you can select: Computer screen only,
Mirror, Extend, Second screen only.
13