Onkyo VC-PX30 Manual De Instrucciones página 4

Operate the Unit
Using Amazon Alexa
Either face the unit and say "Alexa" or press the Amazon
Alexa button to call up the Amazon Alexa Voice Service.
When you have spoken to the unit and Alexa has recognized
a question, the Light Ring lights blue and a brighter blue light
rotates around the ring.
Alexa answers the question after a while.
0 Alexa will not respond if the microphone is off, even if you
call her.
Registering a station
You can register up to 4 of your favorite radio stations. You
can call up stations with one press of a button by registering
them. Perform the following procedure when the unit is on.
1. Play the station you want to register on the Music Control
app.
2. Press and hold one of the Preset buttons 1 to 4 for
4 seconds. Repeat steps 1 and 2 to register your favorite
stations.
0 This feature may not be supported by some services.
Refer to the FAQ for stations you can register.
Refer to the following for FAQ:
http://www.eu.onkyo.com/en/faq/
0 You cannot register stations which you started playing with
Amazon Alexa.
Connecting external devices
To output audio from other devices
You can output the audio being played on this unit through
the speakers of another audio device. Turn off this unit before
connecting the supplied mini plug cable.
1. Connect the supplied mini plug cable to the AUX OUT jack
on the rear and to the audio input jack on your audio
device, etc.
2. Turn on this unit and start play on the music app.
0 If there is no sound output from the audio device you
connected, check whether the audio output level on this
unit is too low.
0 Also refer to the instruction manual of the audio device you
want to connect for connection and operation details.
To input audio from other devices
You can input the audio from other audio devices into this
unit, then stream to other devices on the Play-Fi network for
play via this unit. Turn off this unit before connecting the
supplied mini plug cable.
1. Connect the supplied mini plug cable to the AUX IN jack
on the rear and to the audio output jack on your audio
device, etc.
2. After turning this unit on, tap the "i" at the top of the
screen in the Home screen of the app, then tap "Line In".
3. In the Line In selection screen, tap the device connected
with the mini plug (this unit).
4
All manuals and user guides at all-guides.com
4. Select the device for streaming from the list of Play-Fi
compatible devices in the network.
5. Start play on the connected audio device.
0 If there is no audio output, check whether the audio output
level on your audio device is too low.
0 Also refer to the instruction manual of the audio device you
want to connect for connection and operation details.
Initialize
Initialize the settings of the unit to return the settings to the
status at the time of purchase. This returns the unit to the
status at the time of purchase, so take note of the settings
before proceeding. To initialize, press and hold RESET for
8 seconds. The unit makes a sound when initializing starts. It
takes about 30 seconds to initialize. When initializing is
finished, the Light Ring lights orange and rotates and the unit
is on stand by to receive initial settings.