Bose Professional DesignMax DM8C-SUB Guia De Instalacion página 4

Setup
Installation Options
Installation Options and Accessories
q
Adjustable Tile Bridge (included)
w
Rough-in Pan (optional)
q
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM8C-SUB loudspeaker is designed to work with 18 AWG (0.8 mm
Connection Diagrams
Expose six millimeters (1/4 inch) of
bare wire to attach to the terminals.
Loudspeaker Settings
4 • English
w
+ - +
70V/100V
Conduit Fitting
If using a flexible metal conduit, use with a 3/8-inch conduit fitting
or a 3/8-inch dual (duplex) connector.
Note: Conduit fittings are not provided.
3/8-inch single in
) to 14 AWG (2.1 mm
2
IN OUT
+ - +
20W 40W
40W 80W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
PRO.BOSE.COM
3/8-inch duplex in/loop
) size wire only.
2
IN
+ - + + - +
8Ω
70V
80W 150W*
150W NC**
100V
** NC: No Connection (do not use)
DesignMax DM8C-SUB • Installation Guide
OUT
8Ω