Descargar Imprimir esta página

Spectrum Industries Connect30 Manual Del Usuario página 16

Ocultar thumbs Ver también para Connect30:

Publicidad

Symptom
Buzzing sound
All lights on - not charging any
computers
All lights on - single computer
not charging
Scans each bank and turns off
Charges each bank for 15
minutes and turns off
Scans each bank and turns off
after 15-30 seconds then repeats
scan - continued pattern
Clicking sound
PowerProdigy™ System Troubleshooting Guide
Problem
Faulty relay
Loose connection at power strip or PowerProdigy Check connections
Bad power strip
Some computers, if completely drained, will not
charge the battery
New computers out of the box...some computers
have "shipping mode"
Loose connection
Bad power strip
Bad power adapter
Bad battery
Slow waking computers, not able to scan
Firmware glitch
Over max amps
Slow waking computer, not able to scan properly
Normal operation if click occurs when light turns
on or off
Recommendation
Replace PowerProdigy with another unit with updated fi rmware
Take the affected IEC cable out of the PowerProdigy, plug in
computer power adapter, check that computer is charging
Must power on computer with adapter plugged in with power
(typically HP)
Must power on computer with adapter plugged in with power
Check Connection of computer into power strip
Try computer in a different outlet, try different computer in
problem outlet
Try different computer on problem cable...if no charge...try
different cable on problem computer
Replace battery from like computer to determine problem
Replace PowerProdigy with another unit with updated fi rmware
Power cart OFF / ON - if behavior continues, replace
PowerProdigy
Replace PowerProdigy with another unit with updated fi rmware
This is the relay turning off and on and how the cart is designed
to operate
0118344R10 Page 16 of 21

Publicidad

loading