Publicidad
Idiomas disponibles
Idiomas disponibles
SAVE THESE INSTRUCTIONS
OPERATION INSTRUCTIONS
This appliance is for: 110-240V AC, 50/60HZ, 80W
When plugging the appliance into the outlet prior to use, be aware that
the appliance has a polarized plug (one blade is wider than the other).
As a safety feature this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
BASIC OPERATIONS
Plug the waver into the correct power supply to turn it ON.
Unplug the waver to turn it OFF.
Do not pull the cord. Grasp the plug and unplug the appliance.
Plug the appliance into the correct power supply. The CHI
MULTI-WAVE
®
STYLER display is turned On and Off by pushing the "Power Button".
The display will light up to show it is On. Use the "Temperature Control"
buttons, labeled as
(up) and
(down) to set the correct temperature.
▲
▼
Turn the Barrel Height Dial to adjust barrel height. After 1 hour of non-use,
this waver will shut off automatically.
To restart the waver after auto shut off:
1. Push the "power button"
This appliance features Rapid Infrared Ray heating and uses the Ceramic
Coated Plates to protect the condition of the hair.
4
Publicidad
