Crystal Pond Professional DP250 Manual Del Propietário página 2

Discharge
Rotating
Flow Control
Intake Screen
CAUTION:
IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
•
Check the circuit breaker and try another GFCI protected outlet to ensure the Pump is
getting electrical power.
•
Check the pump discharge, impeller and tubing for obstructions.
•
Check the intake screen to ensure it is not clogged.
•
Flush with water to remove any algae build-up.
•
To clean the Impeller area: rotate the volute 45º counter-clockwise and pull it straight out.
Rotate the impeller by hand to ensure that it can spin freely.
•
Use a stream of water to remove any debris.
•
Monthly maintenance will add to your Pump's life.
Impeller
Always disconnect from the electrical outlet before handling the Pump.
MAINTENANCE
Discharge
Impeller