Descargar Imprimir esta página

Voltr TIL1000WAC Manual Del Usuario página 43

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
MAINTENANCE
PRECAUTIONS
Before dismantling or repairing strawberries or more generally of your machine, it is advisable to
disconnect the extension of the power outlet, and wait for the blades to stop completely.
Be careful not to cut yourself, use leather gloves to keep the blades.
Use only parts recommended by Voltr / Alice's Garden.
BOUNDER
It is strongly advised to check the condition of your motorcycle regularly, before and after each use:
Power supply (extension + machine cable), if there are pronounced wear marks, or cuts, change the
extension or contact our after -sales service for the supply of your motobns.
Check the safety buttons and devices, they must be intact and in perfect working order.
Clean the entire machine (plastics, housings, ventilation ..) using a brush and a damp cloth, then
wipe with a dry cloth. You can apply a layer of oil with a brush for the metal parts. Do not clean with
a water jet.
BLADES
Clean your blades regularly to remove land, dirt and grass.
When you restart your machine, carefully examine your blades.
If your blades are worn or blunt, sharpen them.
If your blades are twisted or unbalanced, you can straighten them.
If your blades are too damaged, or if the above points have not resolved the problem, replace the
blades.
After each use, after cleaning the blades, you can apply oil with a brush, to prevent rust from de-
veloping.
BLADE REPLACEMENT
Place the tool on its side.
Using leather gloves, hold the blades
with one hand.
Use a key + against key to loosen
and remove the bolts now the straw-
berries.
Repair or replace the blades, then
put them back and the bolts and
tighten them firmly.
29/03/2023
EN
43

Publicidad

loading

Productos relacionados para Voltr TIL1000WAC