Toppoint LT95096 Guia De Inicio Rapido

EN
LT95096 | Powerbank Elite with wireless charger 8.000mAh 5W
A B C B
FULLY CHARGE BEFORE FIRST USE.
Charge your portable devices with this convenient 8.000mAh emergency charger. Use the charging cable that came
with your device to power up.
WHAT'S INCLUDED
1. Powerbank
2. Micro-USB cable
3. Manual
CONTROLS
a. ON/OFF switch
b. USB Output port
c. Type-C Input
d. Micro-USB input
e. Battery indicator
f. Wireless charger
SPECIFICATIONS
1. Battery capacity: 8.000mAh
2. Input: DC 5V/2A (Micro-USB/Type-C)
3. Output: DC 5V/2A
4. Wireless Output: 5W max
5. Charge by USB port in 4+ hours depending on USB port power level.
CHARGING A PORTABLE DEVICE
1. Connect the USB charging cable that came with the portable device that needs to be charged to the
USB Output port (B).
2. Connect the other end of the USB charging cable to the portable device. The device will begin to
charge immediately.
RECHARGING THE POWERBANK
1. Attach the included Micro-USB charging cable to the Micro-USB input port (D).
2. Connect the other end of the included Micro-USB charging cable to a computer USB port or adapter.
E D F
CHARGING WIRELESSLY:
1. Place your (wireless charging enabled) device centred on the wireless area to charge wirelessly.
Note: The status indicator of the powerbank will flash while recharging and will stop flashing when fully charged.
SAFETY PRECAUTIONS
WARNING: When using this product, basic precautions should always be followed. Including the following:
1. Read all the instructions before using the product.
2. To reduce the risk of injury, close supervision is necessary when the product is used near children.
3. Do not expose the device to moisture.
4. Do not use the device in excess of its output rating. Overload outputs above rating may results in a risk
of fire or injury.
5. Do not use the device if damaged or modified.
6. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of
injury.
7. Do not disassemble the device. Take it to a qualified service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or injury.
8. Do not expose the device to fire or excessive temperature exposure to fire or temperatures above
212°F (100°C) may cause explosion.
9. Have servicing performed by a qualified repair person using only identical replacement parts.
10. This will ensure that the safety of the product is maintained. If any improper use or any operation
against the user manual, we will not be responsible for the problems.
We reserve all rights for the final explanation.