Pioneer DEH-S7200BHS Manual De Operación página 23

Channel Preset
To preset a channel
1
While receiving a channel you want to store, press and hold one of the number
buttons (1/ to 6/
To play the stored channels, select the band and then press a number button (1/
6/ ).
To preset a channel from the program list
1
While receiving a channel you want to store, press and hold
2
Turn the M.C. dial to select [PRESETS], then press to confirm.
3
Turn the M.C. dial to select a preset channel.
4
Press and hold the M.C. dial to store.
To play the stored channels, turn the M.C. dial to select a preset channel, then press to
confirm.
Parental Control
You can lock any SiriusXM channel (except for Channel 0 and Channel 1).
For details, see [PARENTAL CTRL] in SiriusXM settings (page 31).
SXM RESET
For details, see INITIAL settings on page 7.
Using Pioneer Smart Sync/APP
Pioneer Smart Sync is the application that intelligently brings your maps, messages, and
music together in the vehicle.
You can operate the unit from Pioneer Smart Sync installed on an iPhone/Android
device. In some cases, you can control aspects of the application, such as source
selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application's help
section.
NOTE
The APP source is not available when a Pioneer Smart Sync connection is not made or [USB MTP] is set
to [ON] in the SYSTEM settings (page 35).
) until it stops flashing.
- 23 - - 23 -
to
.