Responsibility Of The Operator - WIKA IV10 Manual De Instrucciones

3. Safety
EN
Any use beyond or different to the intended use is considered as
improper use.

3.4 Responsibility of the operator

The product is used in the industrial sector. The operator is therefore
responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the
safety, accident prevention and environmental protection regulations for
the application area must be maintained.
The operator is obliged to maintain the product label in a legible condi-
tion.
To ensure safe working on the product, the operating company must
ensure the following:
The operating personnel are regularly instructed in all topics
■
regarding work safety, first aid and environmental protection
and know the operating instructions and in particular, the safety
instructions contained therein.
The operating personnel have read the operating instructions and
■
taken note of the safety instructions contained therein.
The intended use for the application is complied with.
■
Following testing, improper use of the product is excluded.
■
8
WARNING!
Injuries through improper use
Improper use of the product can lead to hazardous situations
and injuries.
▶
Refrain from unauthorised modifications to the product.
▶
Do not use the product with abrasive or viscous media.
WIKA operating instructions, shut-off valves and valve manifolds