Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
While fountain is designed to operate as splash free as possible, some water splashing out of the
fountain is inevitable. Place the fountain in a location where any splashing will not cause damage
functioning of the pump.
Operating Fountain
ALWAYS MAKE SURE THE PUMP IS FULLY SUBMERGED UNDER THE WATERLINE PRIOR TO
TURNING PUMP ON.
1. Check that there is enough water in the reservoir.
2. Plug in pump cord into outlet and switch on, pump will start to work.
3.
pump to the +/- signs.
4. Turn off power outlet switch, the pump will stop working.
5. Unplug fountain from outlet if not in use for a long period of time.
Note:
1. Drain the water if you don't plan to use the fountain for a long time to prevent mosquito
breeding and water odor.
2. Be sure to drain all water during winter months or cold seasons to prevent reservoir from
cracking or breaking.
Minimum Water Level
6
Flow control valve
(+)Maximum
(-)Minimum
WARNING: Please check and
ensure the power cord is not dam-
aged before using this appliance.
Publicidad
