Descargar Imprimir esta página

DigiPower DSLR-500 Guia Del Usuario página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

6
|
While the battery is on the charger, connect the base charger to a
power source .
Charging status:
• standby mode: without any batteries installed, the Led will
light steady green .
• Charging mode: when a battery is inserted and being
charged Led will light steady red .
• Charge complete: when the battery is fully charged the Led
will switch back to steady green .
(Typical charge time is 1-hour for batteries up to 900mah .)
noTe:
The charger or battery may become warm when charging, this is
normal .
mainTenanCe:
remove from power outlet before cleaning . use a clean, dry
cloth when necessary to keep the metal contacts of both charger
and battery clean .
operaTing insTrUCTions

Publicidad

loading

Productos relacionados para DigiPower DSLR-500

Este manual también es adecuado para:

Tc-500