Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FILTER AND REGULATOR UNIT
Operating Instructions • Warning Information • Parts Breakdown
Adjustable Pressure Range . . . . . . . .5-120 PSIG ( .3-8 bar)
Maximum Service Pressure . . . . . . . . . . 140 PSIG (9 .7 bar)
Maximum Air Flow . . . . . . . . . . . . . . . . . . . . . . 575 SCFM
AlwAys reAd
instructions
before using
power tools
AlwAys weAr
sAfety goggles
weAr heAring
protection
Avoid
prolonged
exposure to
vibrAtion
AL23
S P E C I F I C A T I O N S
some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
your risk from these exposures varies, depending on how often you do this type of
work. to reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Operating Temperature Range . . . . . . . 41 - 140ºF (5-60ºC)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 .7 lbs .
Dimensions . . . . . . . . . . . . . . . . . W 3 .1" x H 9 .0" x D 4 .0"
Copyright © Professional Tool Products, 2012
1
AL23
AL23
All rights reserved.
05/15/12

Publicidad

loading

Resumen de contenidos para Matco Tools AL23

  • Página 1 AL23 FILTER AND REGULATOR UNIT Operating Instructions • Warning Information • Parts Breakdown S P E C I F I C A T I O N S AL23 Adjustable Pressure Range . . . . . . . .5-120 PSIG ( .3-8 bar) Operating Temperature Range .
  • Página 2 AL23 FILTER AND REGULATOR UNIT WARNING fAiLure To oBserVe These WArnings couLd resuLT in inJury • Keep body working stance balanced and firm. Do This insTrucTion MAnuAL conTAins not overreach when operating the tool. iMporTAnT sAfeTy inforMATion. • Anticipate and be alert for sudden changes in motion reAd This insTrucTion MAnuAL cArefuLLy during start up and operation of any power tool.
  • Página 3 AL23 FILTER AND REGULATOR UNIT reassembly, be sure bowl baffle (#6) and shatterguard (#3) are insTALLATion of fiLTer/reguLATor securely tightened. 1. Maximum air pressure to unit is 140 PSIG (9.7 BAR). 2. Mount the unit as close to the item to be protected as possible. 3. Direction of air flow is designated by an " " and " " on the WARNING! primary unit. Pressure systems can leak causing flying particles. 4. Position the water discharge valve (#12) with the " " pointing Wear safety goggles. (User and bystanders). upward. Read and follow instructions. 5. Proper water drainage should be allowed beneath the water Flying particles can cause injury. discharge valve (#12). Provide a container to catch the water...
  • Página 4 AL23 FILTER AND REGULATOR UNIT ITEM PART NO. DESCRIPTION QTY. Body RSAL2002 Bowl RSAL2003 Shatterguard RSAL2004 Fixed Ring O-Ring Bowl Baffle RSAL2007 Filter Element Interceptor O-Ring 10 RSAL2010 O-Ring 11 RSAL2011 O-Ring 12 RSAL2012 Nut 13 RSAL2013 Piston 14 RSAL2014 Spring 15 RSAL2015 Piston...
  • Página 5 AL23 UNIDAD DE FILTRO Y REGULADOR instrucciones de operación • Inforación de Advertencia • Revisión de Refacciones E S P E C I F I C A C I O N E S AL23 Adjustable Pressure Range . . . . . . . .5-120 PSIG ( .3-8 bar) Operating Temperature Range .
  • Página 6 AL23 UNIDAD DE FILTRO Y REGULADOR ADVERTENCIA EL INCUMPLIMIENTO DE OBSERVAR ESTAS ADVERTENCIAS PUEDEN RESULTAR EN ALGUNA LESIÓN • Mantenga balanceada y firme la postura corporal de esTe MAnuAL insTrucciones trabajo. No se extra limite al operar esta herramienta. conTiene inforMAciÓn iMporTAnTe de seguridAd. LeA cuidAdosAMenTe esTe • Anticipe y sea alerto por cambios repentinos de MAnuAL insTrucTiVo y coMprendA TodA movimiento durante el arranque inicial y operación de...
  • Página 7 AL23 UNIDAD DE FILTRO Y REGULADOR 2. Desatornille el protector contra añicos (#3) en el contrasentido insTALAciÓn deL fiLTro/reguLAdor • 1. La máxima presión de aire a la unidad es de 140 PSIG (9.7 de las agujas del reloj y extráigalo. Luego desatornille el deflector del plato (#6) en el contrasentido de las agujas del reloj BARRAS). y extráigalo, siendo cuidadoso de no perder el interceptor (#8). 2. Monte la unidad lo más cercano posible al artículo a El filtro (#7) ahora puede ser extraído y enjuagado de cualquier...